|
|
1.What is SEALECTION™500?
2. What are the advantages of SEALECTION 500?
3. Does SEALECTION 500 adhere to metal
studs?
4. Are there any compatibility concerns with other
building materials?
5. Any issues around overheating of electric
wiring?
6. Is the SEALECTION 500 corrosive to
metals?
7. Does SEALECTION 500 support the
growth of mold and mildew?
8. What about pests i.e. rodents and insects?
9. What are the acoustical properties of SEALECTION 500?
10. Does SEALECTION 500 contain Urea
Formaldehyde, CFCs or HCFCs?
11. Are there health concerns with SEALECTION 500?
12. Does SEALECTION 500 break down,
sag or shrink?
13. Advantages of Semi-Flexible Foam?
14. R-Value of SEALECTION 500
Insulation?
15. Are these aged values?
16. What is the R-Value of a SEALECTION 500
insulated wall or ceiling?
17. At what stage is SELECTION 500 installed?
18. Can SEALECTION 500 be applied in an
existing wall?
19. Are other trades (workers) allowed in the
general area of the application of SEALECTION 500?
20. Is it possible for a homeowner to install this
foam on their own?
21. How much does SEALECTION 500 cost?
|
|
|
|
|
|
|
|
1.What
is SEALECTION™500?
The SEALECTION 500
spray foam is a complete insulation and air barrier system that insulates
and air seals walls, floors and ceiling cavities against air movement,
including spaces around electrical outlets, baseboards, and where the walls
meet windows and doors etc. This means that outside air (hot or cold)
cannot seep through walls causing drafts or cold spots. It also means that
hot humid air cannot enter the walls and condense on cold surfaces causing
molds, mildew and premature decay.
SEALECTION 500 spray foam insulation is
applied by qualified trained installers, which provides a truly effective
method to construct energy efficient homes and buildings. The SEALECTION 500
is a semi-rigid thermo-set polyurethane foam (see Product Specifications),
which is a cellular plastic composed of millions of microscopic cells of
which most are open. The application of the product is done at the job site
by Certified Installers, providing a custom installation of the insulation.
The application technique and nature of SEALECTION 500
make a perfect fit to all cavities irrespective of size or shape.
By virtue of its low
permeability to air, its adhesion to other building materials, and its
flexibility, SEALECTION 500 becomes much more than just
insulation. It provides superior air leakage and sound control for
residential construction. SEALECTION 500 is a one step
insulation, and air barrier system. SEALECTION 500
eliminates the labor intensive work associated with air-tightness detailing
when insulating with conventional insulation products.
Unlike "loose
fill" insulation, which does not air seal the building cavities. Air
infiltration robs the insulation of its R-value. The superior air sealing
characteristics of The SEALECTION 500 System provides
virtually the same R-Value in the field as it does in the laboratory. Cold
air in winter and hot muggy air in summer cannot pass through our SEALECTION 500
foam as it can through other insulating materials cheating those products
of its performing R-value.
Back to Top
|
|
|
|
2.
Advantages of SEALECTION 500?
As well as
simplifying the construction process for the builder, SEALECTION 500
Insulation eliminates the major causes of building envelope problems,
air-borne moisture movement and entrapment. Blower door tests have shown
that steel framed homes insulated with SEALECTION 500
Insulation and with no polyethylene vapor barrier routinely measure under
the 1.5 ACH50 rating for the most energy efficient home. Heating and
cooling costs are typically reduced by 30 to 50%. Smaller and less
expensive heating and cooling equipment (properly sized) can be used.
SEALECTION 500 is inert and stable over a
long term. It will not settle or compact over time. It offers stable
R-value and is chemically and physically stable under normal conditions
between (-60°F and 180°F).
Back to Top
|
|
|
|
3.
Does SEALECTION 500 adhere to metal studs?
SEALECTION 500 adheres well to steel studs and other
natural materials such as cement board, wood, etc. commonly found in
residential and light commercial construction. Since SEALECTION 500
will adhere to almost all surfaces in the home, areas that do not require SEALECTION 500
insulation such as windows doors etc. must be protected from over-spray.
Back to Top
|
|
|
|
4.
Are There any Compatibility Concerns with Other Building Materials?
SEALECTION 500 is stable in the presence of most solvents found in
binders, bituminous materials, wood preservatives, and sealers. It is
resistant to facers containing plasticizers, fuel, mineral oil, weak acid,
and weak bases, which are typically found in residential and light
commercial construction materials.
Back to Top
|
|
|
|
5.
Any Electric Wiring Overheating Problems?
There is no
special requirement need to encapsulate electrical wires other than what is
required with all types of insulation. As with other types of insulation
such as fiberglass, cellulose when the properly rated size and type of
electrical wires are used, there is no over heating of those electrical
wires.
Back to Top
|
|
|
|
6.
Is the Insulation Corrosive to Metals?
No, SEALECTION 500
Insulation is non-corrosive. It is neutral, which means it is neither
acidic nor alkaline. This product will not cause corrosion to metal studs
and other metal typically found in construction.
Back to Top
|
|
|
|
7.
Does the SEALECTION 500 Insulation Support the Growth of Molds
and ?
No, SEALECTION 500
Insulation offers no food value therefore it cannot support bacteria or
fungal growth. The effective air sealing characteristics of SEALECTION 500
prevents the movement of hot air to the cold parts of the walls. This
effective air-sealing process prevents condensation from taking place
within the wall cavities. The elimination of condensation within the wall
assemblies prevents the growth of molds, mildew.
Back to Top
|
|
|
|
8.
What about pests i.e. roaches, ants, mice and termites?
SEALECTION 500 insulation offers no food value, but it would not
present a sufficient barrier to their entry if they decided to gnaw through
it. Normally, pests take "the path of least resistance" and if
they cannot detect a food source then they would normally not attempt to go
through. In this sense, SEALECTION 500 acts as a
physical barrier and an odor barrier that has shown to significantly reduce
the number of pests entering the homes.
Back to Top
|
|
|
|
9.
What are the acoustical properties of SEALECTION 500?
SEALECTION 500 Insulation has excellent sound absorption properties and
sound transmission properties. When comparing SEALECTION 500
to other insulations, there is a very noteworthy difference. As an
effective air seal, it eliminates the air gaps through which sound travels
easiest. SEALECTION 500 Insulation is superior in
controlling mid-range frequencies that include the most common sounds, the
human voice and stereo music. For a 2"x6" wood cavity insulated
with SEALECTION 500 the Noise Reduction Coefficient
(NRC) is 75, and Sound Transmission Coefficient (STC) is 39
Back to Top
|
|
|
|
10. Does SEALECTION 500 contain Urea Formaldehyde, CFC or
HCFC's?
No, SEALECTION 500
does not contain Urea Formaldehyde, CFC's or HCFC's. This insulation is a
semi-rigid urethane and an open cellular plastic foam, in which water is
incorporated as the sole blowing agent. SEALECTION 500
has obtain the seal of approval by the Environmental Choice Program of
Canada (equivalent to US-EPA)
Back to Top
|
|
|
|
11.
Are there Health concerns with SEALECTION 500?
No, SEALECTION 500
is a "green" product. It meets off gassing requirements of CGSB
51.23 92 for new residential construction. No toxic or carcinogenic
products were detected.
Back to Top
|
|
|
|
12.
Does SEALECTION 500 Break Down, Sag or Shrink?
No, SEALECTION 500
Insulation is stable. It does not shrink or sag. The reaction that created SEALECTION 500
Insulation is irreversible and it cannot break down into its constituent
parts.
Back to Top
|
|
|
|
13.
Advantages of Semi-Flexible Foam?
SEALECTION 500 remains flexible throughout the life of the building.
As the building expands and contracts with changes of season and
temperature, SEALECTION 500 will move with the changes
without destroying the seal.
|
|
|
|
14.
R-Value of SEALECTION 500 Insulation?
The R-Values
of SEALECTION 500 Insulation is rated at R-3.8 per inch.
In a nominal 4-inch wall, the R-Value is about R-13, in a 6" wall
about R-21.
Back to Top
|
|
|
|
15.
Are These Aged Values?
Unlike foams
filled with CFC or HCFC, the R-Value of SEALECTION 500
foam does not decline as it ages.
Back to Top
|
|
|
|
16.
What is the R-Value of a SEALECTION 500 Insulated Wall or
Ceiling?
R-Values of
insulating materials are measured in laboratories and are designated a
nominal R-Value per inch. In the wall or ceiling of a building most
factory-made insulation materials suffer a reduction in performance due to
air leakage and infiltration. The insulating value of many building
components may be as low as 50% of the nominal R-Value of the insulation
they contain. By contrast, the insulation of a wall containing SEALECTION 500
Insulation will perform closely to that of the laboratory tested R-Value of
the material, and it seals the wall cavity from air infiltration as well.
The SEALECTION 500 Insulation System is particularly
suited for steel or wood frame construction. SEALECTION 500
expands 120:1 as it is installed, adhering to surrounding building components.
It completely seals joints, crevices and voids, including
difficult-to-insulate spaces such as steel stud "U" and
"C" sections, double studs, and non-standard stud locations.
Back to Top
|
|
|
|
17.
At What Stage is SELECTION 500 System Installed?
The SEALECTION 500
Insulation System is installed after the windows, doors and roof are in,
the electrical and plumbing inspections are completed, and after any other
electrical or mechanical system located behind the drywall is installed. It
is the last installation to take place before drywall is installed.
Back to Top
|
|
|
|
18.
Can SEALECTION 500 be applied in an Existing Wall?
We do not
recommend that SEALECTION 500 be applied in existing
walls. However, we have had good results in using SEALECTION 500
in the attic and in the crawl space (if applicable) without disturbing the
walls in a retrofit application. The reason is that a large portion of your
energy loss is caused by the "chimney effect" - hot air rises
therefore creating air movement within a house.
If you cap off or
seal the attic (the chimney) with SEALECTION 500 you
have greatly cut down on air movement within the house and wall assemblies,
and therefore have lowered your existing walls, which do not contain
insulation.
Back to Top
|
|
|
|
19.
Are other trades (workers) allowed in the general area of the application
of SEALECTION 500?
SEALECTION 500 shall be installed on site by qualified installers
trained in the proper safety and handling of the chemicals. Other trades
persons should be kept away from the immediate area where spraying is
conducted.
Back to Top
|
|
|
|
20.
Is it possible for a homeowner to install this foam on their own?
SEALECTION 500 Insulation has to be installed by a certified
contractor with specialized proportioning equipment. The installer has been
trained to work with the chemicals involved and has also been trained in a
building science to provide the best installation possible.
Back to Top
|
|
|
|
21.
How much does SEALECTION 500 system cost?
SEALECTION 500 is considered to be more expensive than most
conventional insulation, however SEALECTION 500 cannot
be compared to conventional insulation. When using the SEALECTION 500
spray foam insulation system it actually air seals the building end
eliminates energy robbing air leakage and the associated problems with
moisture, mold and mildew and condensation problems inside the walls. When
calculating the actual cost you need to consider the possible need to
downsize the HVAC systems, eliminate building wraps, and eliminate a
significant portion of the material and labor costs associated with an air
sealing approach. It is erroneous to compare the cost of loose fill
insulation to that of SEALECTION 500 spray foam
insulation system. The invested premium to upgrade from standard fiberglass
is an insignificant part of the overall cost of a home and your long-term
energy costs. When you are planning to install an upgraded insulation
package, remember that the SEALECTION 500 is more
expensive but it provides you with the best performance and comfort value.
The additional upfront costs typically pay for themselves in energy savings
within three years and will keep on saving you money every year thereafter.
Your builder wants
you to build the very best house, be patient and persistent if he is
unfamiliar with our product, but ask for the product by name, SEALECTION 500.
Back to Top
|
|
|
|
Using products with the
EnergyStar label can save energy.
Saving energy reduces
and lowers utility bills.
|
|
